|
Do it yourself
| |||
| ||||
How to replace the battery of a Volkswagen Polo
Model: Volkswagen Polo
Polo 5, Polo V, MK 5, MK V, 6R
- Years 2009-2017
In the video in question, we see how to replace the battery of a Volkswagen Polo 5 car. First of all, get into the vehicle and pull the lever that allows you to open the hood, then lift it up and secure it in a safe position using the appropriate rod. Then locate the battery, it is positioned at the end of the left side of the engine compartment. Using a socket wrench, unscrew the nuts that hold the clamp connected to the negative pole. Then remove the plastic cover above the clamp with the positive pole, and proceed to remove it by unscrewing the appropriate nut. Finally, use the socket wrench again to unscrew the nuts that hold the battery fixed to the metal base. Now you can remove the battery and proceed with its replacement. Remember in this case to first connect the clamp with the positive pole and then the one with the negative pole.
Posted on 17 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Today's brief instructions will show you how to remove and replace the battery on a Volkswagen Polo. First, open the bonnet of the vehicle and begin …
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
How to perform maintenance on a Volkswagen Polo? This video explains how to replace the battery located in the engine bay: open the car door and pull…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
Before replacing the battery in the Volkswagen Polo, immobilise the car on a flat surface or on a ramp to work safely and stably. Now, open the front…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |