Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How do you replace the battery of the Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Battery
Operation: How do you replace the battery of the Volkswagen Polo?

In order to replace the battery of the Volkswagen Polo, it is necessary to open the hood so that access can be gained to the components located inside the engine compartment. The battery will be located in the bottom right, corresponding to the left front headlight. It will be possible to remove it by disconnecting the cables and unscrewing the fixing bolts. At this point, it will be possible to extract the battery from its housing so that a new one can be inserted. The new battery must then be properly connected and secured with the appropriate screws, ensuring that everything is functioning correctly.


Posted on 5 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How many amps is the battery of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How many amps must the battery of a Polo 1.4 diesel with positive pole on the left be? Read Answer
    • Polo 2009-2017 - How many Ah must be the battery for the VW Polo1.2 petrol? Read Answer
    • Polo 2001-2009 - How many amps should the battery have for the VW Polo 1.4 petrol? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos