Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights bulbs of the VW Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light bulb

Video tutorial

Today we will replace together the rear headlight bulbs of the Volkswagen Up. We open the trunk and remove the internal side cover to unscrew the butterfly nut that secures the headlight. We unscrew the nut clockwise to remove the headlight.

We pull the headlight outwards to remove it and disconnect the power connector by pulling the red lever with a flat-head screwdriver. We remove the support plate, moving the tabs from the support and proceed with the replacement of the bulbs.

We insert the H4 model bulbs of 12 Volts and apply the plate. We connect the connector and mount the headlight in its housing.


Posted on 4 June 2025 by ScegliAuto


Related tutorials

Replacement of the rear light bulbs of the Volkswagen Up.
Replacement of the rear light bulbs of the Volkswagen Up.
Volkswagen Up (2011-2024 / MK 1) The instructions in this guide will show us how to disassemble and replace the bulbs of the rear light of the Volkswagen Up. First, let's open the re…
Replacement of the rear headlight and bumper of the Volkswagen Up
Replacement of the rear headlight and bumper of the Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the rear taillight and bumper of the Volkswagen Up. First, we open t…
How to Replace the Front Headlight Bulbs on a Volkswagen Up
How to Replace the Front Headlight Bulbs on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) How to replace the front headlight bulbs on a Volkswagen Up? Follow these steps: open the bonnet by pulling the lever located at the bottom right of …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos