Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Volkswagen Passat

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Headlight bulb

Today we will discover the main steps that will allow us to disassemble and replace the headlight bulb of the Volkswagen Passat. First, we open the hood of the car and start unscrewing the fastening screws of the xenon light control unit; then we disconnect the electrical connector to remove it from the optical group, as shown in the video. At this point, we replace and install the new xenon bulb, of the correct type and with the same attachment; we reassemble the new bulb and, if necessary, perform the same operation on the other front headlight!

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace Front Headlight Bulbs on VW Passat
Replace Front Headlight Bulbs on VW Passat
Volkswagen Passat (2005-2010 / B6, 3C) Are the front headlight bulbs damaged? Here’s how to replace them on a Volkswagen Passat. Open the front bonnet by pulling the lever located at the b…
Replace Front Headlight Bulbs on VW Passat
Replace Front Headlight Bulbs on VW Passat
Volkswagen Passat (2005-2010 / B6, 3C) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Volkswagen Passat. Open the front bonnet by pulling…
How to Replace the Front Headlight Bulb on a Volkswagen Passat
How to Replace the Front Headlight Bulb on a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before starting, open the front bonnet of your Volkswagen Passat. Begin by unscrewing and removing the rear cover of the front headlight bulb. Next, …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos