Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. New Beetle
    4. : How to remove the seat cover of the VW New Beetle

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Seat
Operation: How to remove the seat cover of the VW New Beetle

If you want to carry out a thorough washing of the upholstery, avoiding that part of the dirt can be absorbed by the padding sponge underneath, it is advisable to remove the seat upholstery; for this last operation, it is necessary to start by disassembling the seat from the passenger compartment, starting with the removal of the plastic bands covering the sliding rails and then disassembling the front pins and then the rear end-of-stroke pins: the seat comes off by sliding it all the way down. 'back and disassembly is complete disconnect the sockets; once the seat has been placed on the workbench, the ring hooks that secure the fabric to the frame and the rear plastic band must be released; the upholstery will then be washed and reassembled following the reverse procedure.


Posted on 3 November 2023 by ScegliAuto



How to remove the seats of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Let's find out the procedure necessary to disassemble the front seats of the Volkswagen New Beetle (or Beetle), in simple steps. First of all we open
Remove the seat of the New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Remove the seat of the new Beetle? Let's see the disassembly of the front seat. We open the front door, move the seat back (with the electric buttons
How do you replace the door lock of the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In order to remove the door lock of the Volkswagen New Beetle, you need to loosen the screws that secure the inner panel of the door, completely deta

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos