Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the throttle body of the Volkswagen Golf 1.4 TSI.

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Throttle body

See other generations:
Video tutorial

Below we will see the main instructions on how to disassemble and replace the throttle body of the Volkswagen Golf 1.4 TSI. First, let's open the vehicle's hood and start by disconnecting the air intake hose, then remove the air filter box; next, we unscrew the screws of the throttle body located underneath, disconnecting its electrical connector to remove it, as shown in the video.

After this, we will clean it with appropriate products, opting for replacement if it is damaged; then we reassemble the throttle body and the air filter box.


Posted on 9 December 2025 by ScegliAuto


Related tutorials

How to Remove the Throttle Body from the Volkswagen Golf
How to Remove the Throttle Body from the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Briefly follow these instructions to remove and replace the throttle body of the Volkswagen Golf. First, open the bonnet of your car and start by dis…
How to Remove the Throttle Body on a Volkswagen Golf 5 1.6
How to Remove the Throttle Body on a Volkswagen Golf 5 1.6
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, see how to remove the throttle body on a fifth-generation Volkswagen Golf with a 1.6 petrol engine. First, open the bonnet and disconn…
How to Remove the Throttle Body on Volkswagen Golf 4 1.4 Petrol
How to Remove the Throttle Body on Volkswagen Golf 4 1.4 Petrol
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to remove the throttle body from a Volkswagen Golf 1.4 Petrol, fourth generation; this procedure can also …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos