Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Crafter

Model: Volkswagen Crafter 2F, MK 1, 2E - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Today, we will see how to reset the service light on a Volkswagen Crafter. To perform the reset, turn on the vehicle's ignition and press the button on the left side of the instrument panel to access the current mileage of the engine oil. Keep the button pressed until the current mileage is displayed and the vehicle emits a beep.

When you hear the beep, release the button and press the upper arrow button on the steering wheel. Hold the button for a few seconds, release it, and then press the button on the instrument panel again until the reset procedure is complete.


Posted on 14 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volkswagen Crafter
How to Reset the Service Light on the Volkswagen Crafter
Volkswagen Crafter (2017-2026 / MK 2, SZ, SY) This article shows how to reset the service light on the Volkswagen Crafter. First, ensure the gearbox is in neutral if it’s manual or in P if it’s a…
How to Reset the "Service" Light on a Volkswagen Crafter?
How to Reset the "Service" Light on a Volkswagen Crafter?
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) Hello, today discover how to reset the "Service" light on your Volkswagen Crafter. Start by sitting in the driver's seat of the van. Then, press and …
How to Reset the Service Light on a Volkswagen Crafter
How to Reset the Service Light on a Volkswagen Crafter
Volkswagen Crafter (2006-2017 / 2F, MK 1, 2E) Today, I will explain how to reset the service light related to the service interval on a Volkswagen Crafter model 1, independently. To reset the ser…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos