Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Maintenance (Service) Light on the Volkswagen Touran

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

Below are the instructions that will allow you to reset the service light for the routine maintenance of the engine oil change on the Volkswagen Touran. In this case, you will perform the reset of the maintenance message using diagnostic software, which should be connected to the OBD port; select the make and model, go to the service section to confirm and execute the reset of the light, as shown in the video.

At this point, disconnect the diagnostic tool and turn off the dashboard, verifying the successful reset of the maintenance light!


Posted on 22 May 2026 by ScegliAuto


Related tutorials

Resetting the Maintenance Interval (Service) on a Volkswagen Touran
Resetting the Maintenance Interval (Service) on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Below, we will discover how to reset the maintenance interval (service) on the Volkswagen Touran. First, get in the vehicle and press and hold the ri…
Resetting the Maintenance (Service) Light of the Volkswagen Touran
Resetting the Maintenance (Service) Light of the Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) In this guide, you will discover the instructions to reset the service light for the routine maintenance oil change of the Volkswagen Touran. In this…
How to Reset the Service Light on a VW Touran
How to Reset the Service Light on a VW Touran
Volkswagen Touran (2015-2024 / 5T, MK 2) To reset the service light on a Volkswagen Touran, first turn on the instrument panel and then press the button located to the left of the instrument…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos