Do it yourself
Frequently asked questions about cars and motorcycles

Volkswagen Touran: how to change the engine oil

Model: Volkswagen Touran 5T, MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

See other generations:
Video tutorial

To perform an oil change on a Volkswagen, work with the engine warm and the car on level ground. Open the hood and unscrew the oil filler cap to facilitate drainage.

Safely lift the front of the car and access the lower part of the engine; if there is an undercarriage protection, remove it to reach the oil pan. Place a large container under the drain plug and unscrew it with the appropriate wrench, allowing the old oil to drain completely.

When the flow slows down, clean the area and reattach the plug with its washer in good condition.

Then, replace the oil filter in its seat, making sure to tighten the new filter correctly. At this point, lower the car back to the ground, pour the new oil through the top opening, and check the level with the dipstick, ensuring it is between the minimum and maximum marks.

Start the engine for a few seconds, turn it off, and check the level again, adding oil if necessary. Finally, check for any leaks under the vehicle and replace any removed covers: your oil change on the Volkswagen is complete.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

Volkswagen Touran (2003-2015 / 1T, MK 1) To change the engine oil on the Volkswagen Touran, access the underside of the vehicle, where you will find the oil drain plug: loosen this plug to c…
Volkswagen Touran (2003-2015 / 1T, MK 1) Replace the engine oil and filter on a Volkswagen Touran. This operation is straightforward by following the correct steps; watch this video to proce…
Volkswagen Touran (2015-2024 / 5T, MK 2) In the event of electrical faults affecting one or more components in your Volkswagen Touran Mk2, you will need to address the respective fuses. With…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos