Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Steering Fault on the Volkswagen Polo 6N

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

The power steering fault on the Volkswagen Polo 6N is quite common, and the reason is attributed to the steering angle connector, a critical component that sends information to the control unit about how much and how quickly you are turning the steering wheel.

You can find the component on Amazon with the code B0B1J5FZX1 for £9.79, with free delivery (ensure compatibility of the part).

For replacement, start by disconnecting the car battery, and remove the old connector secured with two screws to the steering column, under the steering wheel. After installing the new sensor and reconnecting the battery, the steering may not work immediately, but you will need to teach the control unit the zero point (straight steering): turn the ignition on, rotate the steering fully to the left, then fully to the right.

Bring it back to the exact centre, turn off the car and remove the key. Restart the car; now the assistance should be active. Remember to also clear any error codes from the control unit using an OBD2 diagnostic tool.


Posted on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Power Steering on a Volkswagen Polo
How to Replace the Power Steering on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Here are the main steps to dismantle and replace the power steering on a Volkswagen Polo. First, raise the vehicle and begin by removing the front ri…
What is the fuse diagram for the Volkswagen Polo 5?
What is the fuse diagram for the Volkswagen Polo 5?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) The fuse diagram or chart, in general and not only for the 2013 Volkswagen Polo 5, allows for the verification of a possible electrical fault probabl…
Where is the washer fuse located in the Volkswagen Polo?
Where is the washer fuse located in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this video, see where the washer fuse is located in the Volkswagen Polo, which is the first element to check if they suddenly stop working. As sho…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos