Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper on a VW Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Front bumper

See other generations:
Video tutorial

This video shows the replacement of the front bumper on a Volkswagen Polo. Lift the bonnet and secure it. Use a plastic lever to remove the securing rivets located at the top of the bumper. Once the top rivets are removed, unscrew the rivets from the wheel arch liners and finally remove the pins located at the bottom of the bumper.

Remove the fog light grilles and the central grille. Carefully pull the bumper away from the vehicle body.

To proceed with the installation: align the bumper with the vehicle body and tighten all screws around the wheel arch liners and the perimeter of the bumper.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of the Volkswagen Polo 4
How to Remove the Front Headlight of the Volkswagen Polo 4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) If one of the front headlights of your Volkswagen Polo Mk4 is faulty or damaged, proceed with its removal to repair or replace it. First, turn off th…
Removing and Replacing the Front Headlamp on a Volkswagen Polo
Removing and Replacing the Front Headlamp on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This brief guide illustrates the procedure for removing and replacing the front headlamp on a Volkswagen Polo. First, open the bonnet of the vehicle …
How to Remove the Front Bumper of the Volkswagen Polo
How to Remove the Front Bumper of the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this guide, find the main instructions on how to remove and replace the front bumper of the Volkswagen Polo. First, open the bonnet of your car an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos