Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Air Conditioning Compressor and Dryer

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Air conditioner

In this video, observe the process of replacing the air conditioning compressor and dryer on a Volkswagen Golf. Start by removing the front grille and bumper; disconnect and detach the front headlights, then unscrew and dismantle the entire front structure of the vehicle. Now that you have access to the condenser, remove its front grille and clean it with compressed air. Next, disconnect the faulty compressor and install a new one. Clean the condenser grille with compressed air as well. Proceed to remove and replace the dryer (remember to insert the O-rings). Now reattach the condenser to the vehicle and reposition the "nose" as it was before, then reassemble the bumper, front headlights, and grille as they were initially.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today's instructions will allow us to remove and replace the air conditioning compressor on a Volkswagen Golf 1.6 TDI. First, lift the vehicle and st…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today's instructions will allow us to disassemble and replace the air conditioning compressor of the Volkswagen Golf 1.9 TDI. First, let's open the h…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The procedure for replacing the air conditioning compressor on the Volkswagen Golf is carried out by opening the hood, so that you have access to the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos