Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Brake Pad Replacement on a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Brake pads

See other generations:
Video tutorial

In this video, learn how to replace the front brake pads on a sixth-generation Volkswagen Golf, specifically a GTI version. First, remove the wheel by loosening the bolts and lift the vehicle with a jack.

Next, retract the caliper piston by levering in the designated slot and proceed to unscrew the rear bolts of the caliper to remove it: now you can take out the old pads and replace them with new ones! It is recommended to use efficient pads with a good friction rating to ensure driving safety!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on a VW Golf 6
Replacing the Front Brake Pads on a VW Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Replace the front brake pads on a VW Golf 6. Lift the car on a column lift (jack) to the desired height, then remove the wheel (using a socket wrench…
How to Replace the Rear Brake Pad Housing
How to Replace the Rear Brake Pad Housing
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Position the car on a lift and raise it to a suitable height for working underneath. Remove the rear wheel. Disconnect the two cables for the brake o…
Replacing the Rear Brake Pads on a Volkswagen Golf VII
Replacing the Rear Brake Pads on a Volkswagen Golf VII
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the rear brake pads on a Volkswagen Golf, first open the brake fluid reservoir, lift the car, and remove the wheel. Clean the surfaces nea…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos