Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radio and Dashboard Disassembly

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
Video tutorial

Unscrew the mounting screws of the glove compartment located in the centre of the dashboard, just above the central air vents, and remove it by pulling it upwards; then disassemble the underlying support including the air vents and the hazard light button.

At this point, the two screws securing the frame around the radio and air conditioning controls are visible and must be removed to detach the frame.

Finally, access the four screws securing the radio located at each corner: once unscrewed, it can be extracted by disconnecting the plugs.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Removing the Radio from a VW Golf 3
Removing the Radio from a VW Golf 3
Volkswagen Golf (1991-1997 / MK 3, Golf III, Golf 3) Is the radio in your Golf 3 damaged or too old? Here’s how to remove it from the central dashboard. Insert the release keys into the slots on the pla…
Removing the Radio Cover on Golf 7
Removing the Radio Cover on Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Want to remove the radio cover on the Golf for replacement? Let's look at removing the cover on the Golf 7. Remove the trim around the radio using a …
Removing the Radio from a Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Do you want to replace the radio in a Golf 4? Here’s how to remove it from inside the dashboard and how to fit the new one. Remove the radio using th…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos