Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heater Fan from a Volkswagen Touareg

Model: Volkswagen Touareg 7L, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

Before starting, sit in the front passenger seat of your Volkswagen Touareg. Begin by unclipping and removing the cover located under the glove compartment, then disconnect the associated connector.

By doing this, you will reach the heater fan. Next, disconnect the corresponding electrical connector. Once you have disconnected the electrical connector, unscrew and remove the securing screws.

After completing this step, you can remove the cabin fan, and the disassembly will be finished.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan from a Volkswagen Touareg
How to Remove the Cabin Fan from a Volkswagen Touareg
Volkswagen Touareg (2002-2010 / 7L, MK 1) Before starting, open the front passenger door of your Volkswagen Touareg. Begin by unclipping and removing the lower cover of the glove compartment.…
How to Replace the Cooling Fan on the Volkswagen Touareg?
How to Replace the Cooling Fan on the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the cooling fan on the Volkswagen Touareg, open the bonnet to access the components inside the engine bay: at the front of the bay, you wi…
Where are the Radiator Fan Fuses Located in the Volkswagen Touareg?
Where are the Radiator Fan Fuses Located in the Volkswagen Touareg?
Volkswagen Touareg (2002-2010 / 7L, MK 1) In this video, you can see where the radiator fan fuses are located in the Volkswagen Touareg, useful if it malfunctions. There are three fuses locat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos