Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Instrument Cluster Volkswagen Polo 9N

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Instrument cluster

In this video tutorial, you will learn how to dismantle the instrument cluster of a Volkswagen Polo 9N in simple and quick steps. First, get inside the car and remove the lower plastic piece located beneath the cluster; then use a screwdriver or T20 Torx key to unscrew the fastening screws of the cluster, as shown in the video. At this point, you can pull and extract the instrument cluster; all that remains is to disconnect the rear electrical connector to remove it completely. Apply the reverse procedure for reassembly!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Conditioning Fan from the Volkswagen Polo 5
Removing the Air Conditioning Fan from the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this tutorial video, learn how to remove and replace the air conditioning fan on the Volkswagen Polo 6R, fifth series, by following these simple s…
Removing the camshaft sensor from a Volkswagen Polo 1.4
Removing the camshaft sensor from a Volkswagen Polo 1.4
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this video tutorial, you will find instructions on how to remove and replace the camshaft sensor from a Volkswagen Polo 1.4, as well as from a Sea…
How to Remove the Dashboard of the Volkswagen Polo
How to Remove the Dashboard of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Below are the instructions necessary to remove and replace the entire dashboard of the Volkswagen Polo. First, get inside the vehicle and start by re…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos