Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel from a VW Passat B7

Model: Volkswagen Passat B7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

How do you remove the door cover panel from a Passat? Remove the various plastic covers and securing screws to take off the cover panel. Remove the internal handle cover of the door panel, then unscrew the screws inside it. Unscrew the remaining screws on the door panel and detach the securing clips.

Finally, grasp the panel with your hands and lever it off the door. Refit everything in reverse order.

First, reconnect the various electrical connectors, then secure the cover panel back onto the car door.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (1996-2005 / 3BG, B5) Is the door panel of a VW Passat damaged and needs replacing? Here’s how to remove it from the right door. Remove the switch panel in the internal ha…
Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…
Volkswagen Passat (2010-2014 / B7) Remove the door panel from the Passat? Here’s how to detach it from the top of the door. Remove the covers for the screws located near the handle and…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos