Do it yourself
| ||||
|
Volkswagen Jetta - Video tutorial
Model: Volkswagen Jetta
MK 5, A5
- Years 2005-2010 The engine air filter is contained inside the engine cover itself: in order to remove it, it is first necessary to unhook the fastening clamps of the front air conveyor and the sleeve connected to the filter container itself. Once the cover has been removed and placed on the bench, unscrew the fixing screws of the filter container cap, extract it and insert the new one after having dusted its seat (pay attention so that no residue can end up in the suction duct). Since you have removed the engine cover, it may also be useful to take a look at the spark plugs: unclip the sockets connected to the ignition coils, unscrew the fixing screws of the coils themselves and remove the pipettes; dust before unscrewing the spark plugs and disassembling them. Install the new spark plugs and proceed in reverse for reassembly.
Posted on 15 July 2023 by ScegliAuto
This video is currently unavailable
Replacement of spark plugs in the car
Volkswagen Jetta (2005-2010 / MK 5, A5) Spark plugs are a fundamental component of the engine, replacing them is not a very difficult job to perform. Once the hood is opened, the car's engi
Replacing the spark plugs on the engine
Volkswagen Jetta (2005-2010 / MK 5, A5) Disconnect the negative pole of the battery. Gently remove the plastic cover protecting the motor by simply lifting it upwards. In order not to confu
Engine air filter replacement
Volkswagen Jetta (2005-2010 / MK 5, A5) Open the front hood and remove the plastic cover placed just above the engine: it is necessary to disconnect the intake duct and the connection sleev Other guides that may interest you
|
How do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |