Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Disassembly of the front seats of the Volkswagen Polo mk5

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Seat
Operation: Disassembly of the front seats of the Volkswagen Polo mk5

The guide shows how to remove the front seat of both the driver and the passenger on the Volkswagen Polo mk5. The first operation to carry out is to remove the ignition key and, possibly, disconnect the battery, in order to avoid possible malfunctions of the airbags. At this point, the seat to be removed must be pulled all the way back until two m10 bolts on the guide are exposed. They have to be unscrewed. At the end of this step, the same thing must be done on the bolts placed on the back of the seat; then you have to push the seat all the way forward and unscrew the other two bolts. After releasing the seat it is necessary to tilt it towards the inside of the vehicle in order to disconnect the airbag cables. The seat can now be removed from the vehicle.


Posted on 7 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2001-2009 - How do you remove the rear seats of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to remove the front seat from Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos