Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Cup Holder from a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Checks and maintenance

Before starting, sit in the driver's seat of your Volkswagen Polo. Begin by uncliping and removing the radio from the dashboard. After that, disconnect the corresponding electrical connector, then completely remove the radio. By doing this, you will have reached the clip that secures the cup holder to the centre console. Proceed to unclip this clip. At this point, you should extract and remove the cup holder from its housing. Once you have extracted and removed the cup holder, you will have completed the disassembly.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) How do you remove the door panel (passenger side rear) on a Volkswagen Polo? Before starting the disassembly, disconnect the battery terminals locate…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before starting, sit in the front passenger seat of your Volkswagen Polo. Begin by opening the glove compartment door to reveal the screws that secur…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before you can start, sit in the front passenger seat of your Volkswagen Polo. Begin by opening the glove compartment door to reveal the screws that …

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer
    • Polo 2017-2025 - Where is the temperature sensor of the Volkswagen Polo located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos