Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

This video provides step-by-step instructions for removing the headlining panel, commonly referred to as the headlining, on the Volkswagen Golf fifth series. First, get into the vehicle and start by removing the sun visors and grab handles, undoing the fixing screws of the brackets; then remove the interior light fittings and the side pillars, as shown in the video.

Once all screws are removed and the electrical connectors are disconnected, you can pry down the headlining, preferably starting from the rear, as shown in the video!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) How do you remove the car roof? Disassemble the roof panel to replace the damaged lining? Let's look at the disassembly process on a Golf. Remove the…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) How to remove the roof lining panel on a Golf 6? Let’s see all the parts to remove to take off the panel. To remove the roof lining panel, start by r…
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) How do you remove the roof panel of a Volkswagen Golf? Follow these steps. Start by removing the side handles of the headlining with a screwdriver, t…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos