Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Switch on a Volkswagen Golf?

Model: Volkswagen Golf Golf 2, MK 2 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the reverse switch on a Volkswagen Golf, lift the bonnet and remove the battery and compressor to access the gearbox. Follow the instructions shown in the video to remove the battery and compressor.

At this point, remove the screws securing the plate under the battery: the gearbox will be visible. Now disconnect all cables and connectors, and use a spanner to extract the reverse switch.

Finally, insert the new part and reassemble all previously removed components.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Reverse Switch on a Volkswagen Golf?
How to Replace the Reverse Switch on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the reverse switch on a Volkswagen Golf, open the bonnet to access the components inside the engine bay. You will need to loosen the screw…
Replacing the Reverse Switch on a Volkswagen Golf Mk4
Replacing the Reverse Switch on a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today, you will learn how to remove and replace the reverse switch on a fourth-generation Volkswagen Golf. First, open and lift the bonnet of your ca…
Check the Reverse Light Switch
Check the Reverse Light Switch
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) If the reverse lights do not illuminate when engaging reverse gear, first ensure that the bulbs are functioning and that voltage is reaching the resp…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos