Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Reverse Switch on a Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

To replace the reverse switch on a Volkswagen Golf, open the bonnet to access the components inside the engine bay. You will need to loosen the screws that secure the cover at the front of the engine bay and those that secure the air filter housing, moving both components to access their underside. The reverse switch must be removed from its housing by disconnecting its connector and unscrewing it with a spanner. This will allow you to insert the new switch, connecting and securing it properly.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today, you will learn how to remove and replace the reverse switch on a fourth-generation Volkswagen Golf. First, open and lift the bonnet of your ca…
Volkswagen Golf (1983-1992 / MK 2, Golf 2) To replace the reverse switch on a Volkswagen Golf, lift the bonnet and remove the battery and compressor to access the gearbox. Follow the instructi…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) As seen in this tutorial, replacing the reversing light switch on a Volkswagen Golf is a straightforward task. First, open the bonnet and locate the …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos