Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Windscreen Replacement

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield

See other generations:
Video tutorial

Replacing the windscreen is a delicate and dangerous operation. To prevent accidental breakage of the glass during removal, it is advisable to protect the interior of the vehicle with covers to avoid glass shards spreading, including into the ventilation system.

Also, use appropriate hand and eye protection. Start by lowering the front windows, then use a sturdy plastic tool to remove the seal and trim around the glass.

With the bonnet open, remove the wiper mechanism to take it out. Unscrew the retaining screws of the air intake grille and remove it, also disconnecting the fan motor connector. Remove the covers from the two pillars by acting on the screws hidden behind the plastic caps.

Protect the engine air intakes and proceed by lifting the windscreen to remove it. It is advisable to carry out this operation with the appropriate suction cups. Use a tool to clean the edge thoroughly from the remnants of the old seal.

Apply silicone sealant to the edge of the new glass that you will position on the vehicle using the suction cups. Place the appropriate spacers along the edge of the glass to position it correctly.

Complete the sealing. Refit the camera and finish with the trims.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Volkswagen Beetle
Replacing the Cabin Air Filter on a Volkswagen Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Remove the central upper plastic cover near the windscreen, behind the central dashboard. To do this, you will need to hit the plastic so that it rel…
Removing the Window Regulator Motor on a Volkswagen New Beetle
Removing the Window Regulator Motor on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Below are the instructions to remove and replace the window regulator motor on a Volkswagen New Beetle in simple steps. First, open the front door of…
How to recalibrate the motor and window mechanism of the Volkswagen New Beetle
How to recalibrate the motor and window mechanism of the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) In this brief guide, you will see the instructions that will allow you to recalibrate the motor and window mechanism of the Volkswagen New Beetle. Fi…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos