Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Volkswagen Beetle

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

Remove the central upper plastic cover near the windscreen, behind the central dashboard. To do this, you will need to hit the plastic so that it releases from the clips.

Unscrew the two T20 torx bolts. At this point, use a plastic lever to detach the side plastic on the passenger side, also near the windscreen.

There will also be T20 bolts to unscrew here, in this case, there are five. Once you reach this point, you can remove the plastic cover and access the pollen filter: take it out, clean the compartment, and insert the new filter.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Handle on a Volkswagen Beetle?
How to Replace the Interior Handle on a Volkswagen Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To replace the interior handle on a Volkswagen Beetle, unscrew the fixing screws that secure the door panel to its housing: these screws are located …
How to Remove the Roof Position Sensor on a Volkswagen Beetle (Maggiolone)
How to Remove the Roof Position Sensor on a Volkswagen Beetle (Maggiolone)
Volkswagen New Beetle (1999-2012 / 9C, MK 2) In this guide, you will find the instructions that will allow you to remove the roof position sensor on a Volkswagen Beetle Cabriolet, also known as …
How to Replace the Window Switch Button in a Volkswagen Beetle
How to Replace the Window Switch Button in a Volkswagen Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Before starting, open the door of your Volkswagen Beetle. Begin by removing the door panel, disengaging the relevant clips and unscrewing the fixing …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos