Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Replacing the interior fan on the Volkswagen Polo 6R

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Interior blower
Operation: Replacing the interior fan on the Volkswagen Polo 6R

In this video tutorial we will see how to remove and replace the passenger compartment fan on the Volkswagen Polo 6R, following these simple steps. First of all we get on board the car and start by removing the glove box; to do this we open the drawer and remove the screws that we find on the top and on the sides, as shown in the video. At this point we remove the plastic side cover; once the glovebox has been removed we can unscrew the screws of our fan, using a socket wrench. We just have to disconnect the electrical connector to remove and replace the fan!


Posted on 15 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Why is the Volkswagen Polo's cabin fan not working? Read Answer
    • Polo 2009-2017 - Where is the cabin fan resistor located in the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - Why isn't the fan of the Volkswagen Polo 5 working? Read Answer
    • Polo 2009-2017 - Why does the interior blower no longer work in the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Why is the fan of the Volkswagen Polo 4 not working? Read Answer
    • Polo 2017-2025 - What to do if the Volkswagen Polo fan does not work? Read Answer
    • Polo 2001-2009 - Why does the ventilation of the Polo 4 only work on level 4? Read Answer
    • Polo 2009-2017 - How to replace the interior blower fuse in a Volkswagen Polo tdi? Read Answer
    • Polo 2001-2009 - Where is the resistor of the passenger compartment fan of the 2007 VW Polo? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos