Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third stop on Volkswagen Golf MK7

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years 2012-2019
Part: Tail light

Today we will see the steps to be able to remove and replace the light or third brake light bulbs on a Volkswagen Golf seventh series; this procedure can be applied to many other cars with the same system. To remove the third stop we will simply pry the sides on it, in order to release it; we then use something thin and pointed to remove it, as shown in the video. At this point we disconnect its electrical connector and the black tube to remove it definitively; replace, if necessary, the bulbs or the third stop and reassemble everything!

Posted on 15 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement central stop on Volkswagen Golf Sw
Replacement central stop on Volkswagen Golf Sw
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) With a plastic lever (not iron!) Or a small screwdriver, pull the red plastic casing of the central stop out of its seat. Carry out this operation sl…
Remove the third stop Golf 5
Remove the third stop Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf V, Golf 5) How to remove the third stop of a Golf 5? Let's see how the piece is removed from inside the tailgate. We lever with a small screwdriver in the later…
How to replace the battery of the VW Golf 7 key
How to replace the battery of the VW Golf 7 key
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today we will see how to replace the battery of a Volkswagen Golf mk7 key when it stops working. The first step is to lift the metal key. The second …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos