Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Air filter

See other generations:
Video tutorial

The air filter plays a central role in maintaining optimal engine health and efficiency. For this reason, it is essential to replace it at the right time to avoid damaging the engine, especially considering the risk of abnormal overheating.

Contrary to what one might think, this is a very simple operation, and you just need to follow these instructions. First, ensure that the engine is off and that the temperature is relatively low. Then, open the front bonnet, locate the plastic cover of the air filter, and disconnect it from the connector.

Next, unscrew the screws and remove the entire piece. Just below is the filter.

Remove it and replace it with a new one. Finally, refit the cover correctly and close the bonnet.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a VW Golf 7
How to Replace the Air Filter on a VW Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The air filter on a Volkswagen Golf model mk7 is located under the front bonnet, specifically on the right side near the air duct and engine. To repl…
How to change the air filter of the Volkswagen Golf VI
How to change the air filter of the Volkswagen Golf VI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this video, we see how to change the air filter on the Volkswagen Golf VI: we open the hood and find the air filter on the right side of the engin…
How to Replace the Air Filter on the VW Golf 4
How to Replace the Air Filter on the VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide explains how to replace the air filter on a Volkswagen Golf model 4. Start the replacement by opening the front bonnet and then disconnect…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos