Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate and Deactivate Front Assist in the Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this tutorial, you will see how to activate and deactivate Front Assist, the front collision avoidance system. First, note that the system is always active by default. To proceed with deactivation and subsequent reactivation, turn on the instrument cluster, then press the "CAR" button located on the right frame of the touchscreen display. Next, select the "Setup" icon in the bottom right corner, enter the "Driving assistance" section, and locate the relevant option at the bottom of the screen. At this point, you can activate and deactivate the system by pressing the corresponding confirmation box.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The Front Assist system installed in Volkswagen vehicles, such as the Volkswagen Golf 8, consists of an electronic sensor installed inside the front …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In order to reset the Front Assist of the Volkswagen Golf, it will be necessary to completely remove the front bumper and the corresponding grille: t…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Activating and deactivating the Cruise Control is a very simple and quick operation to perform on any latest generation vehicle. On the Volkswagen Go…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos