Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the alternator on the Volkswagen Polo 9N 1.2

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Alternator
Operation: How to remove the alternator on the Volkswagen Polo 9N 1.2

Let's find out in this guide the procedure necessary for the disassembly and replacement of the alternator on the Volkswagen Polo 9N, with 1.2 3-cylinder engine. First we open the engine hood of our car and start by removing the engine protection; then we go to loosen the belt pretensioner, in order to remove it, as shown in the video. At this point we unscrew the 16 mm nut of the pretensioner, in order to remove it; then we unscrew the alternator screws, using a 13 mm wrench. We just have to remove it and replace it with the new one!


Posted on 4 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - Where is the alternator on the Volkswagen Polo located? Read Answer
    • Polo 2009-2017 - What does the red light mean with a battery in the Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos