Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Installation of Wheel Centre Cap

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Tires

This video illustrates how to correctly remove and install the plastic centre cap of the alloy wheels on your car. To remove the various centre caps, simply lever one side of them, taking care not to force too much as they are plastic and the internal fixing tabs can break. Once the centre cap is removed, to reinstall it, place it on its anchoring seat and push it inwards; if you cannot install it, check the correct position of both the ring that secures it and the centre cap itself.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel of a VW New Beetle
How to remove the door panel of a VW New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Today we will explain how to remove the door panel of a Volkswagen New Beetle convertible model. We start the removal of the panel by opening the doo…
How to find and replace the fuse box of the Volkswagen New Beetle
How to find and replace the fuse box of the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In today's video, the positioning and removal of the external fuse box of the Volkswagen New Beetle is shown. First, we open the hood of the car and …
Removing the Window Regulator Motor on a Volkswagen New Beetle
Removing the Window Regulator Motor on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Below are the instructions to remove and replace the window regulator motor on a Volkswagen New Beetle in simple steps. First, open the front door of…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos