Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Track Rod Ends on the Volkswagen Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Tie rods

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the steering track rod ends on the Volkswagen Golf. The first step is to lift the front of the vehicle with a hydraulic jack and place safety stands; then remove the front wheels using a 17mm socket to unscrew the bolts.

Once the wheel is removed, clean the fastening element that connects the track rod ends to the steering knuckle.

Memorise the exact position of the ball joint to avoid misalignment during reassembly. Unscrew the nut connecting the stem to the steering knuckle.

Clean the mounting seats of the track rod ends with a wire brush. Connect the track rod stem to the steering knuckle.

Clean the surface of the brake disc with brake cleaner. Lower the car and tighten the wheel bolts.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Dismantling the Steering Box
Dismantling the Steering Box
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Lift the front of the vehicle and support it on two axle stands. The next step is to remove the wheels. Ensure the car is stable, perhaps by blocking…
Guide to Removing the Steering Lock on the Volkswagen Golf
Guide to Removing the Steering Lock on the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Below are the main instructions to remove and replace the steering lock and the indicator stalk on the Volkswagen Golf. First, get in the vehicle and…
Removing the Power Steering Pump on the Volkswagen Golf 4
Removing the Power Steering Pump on the Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to remove and replace the power steering pump on the fourth series Volkswagen Golf, as well as on the Jett…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos