Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on a Volkswagen Polo

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part:

If the low tyre pressure warning light has illuminated on the dashboard while driving, first check the pressures on all four tyres and adjust them to the manufacturer's recommended levels if necessary. After this, you will need to reset the warning light that has come on. To do this, follow the simple instructions below. Open the door, sit in the driver's seat, and turn on the ignition. To reset the light, locate the button inside the passenger side glove compartment. Open the glove compartment and press the button, holding it until the light goes out.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Volkswagen Polo
How to reset the tire pressure sensor of the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) The steps outlined in this guide will show us how to reset the tire pressure warning light (TPMS) of the Volkswagen Polo; before performing the reset…
How to reset the tyre pressure warning light on the Volkswagen Polo
How to reset the tyre pressure warning light on the Volkswagen Polo
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) In this video, we will see the procedure necessary to reset the tyre pressure warning light (TPMS) on the Volkswagen Polo; before performing the rese…
How to reset the tire pressure warning light on a Volkswagen Polo?
How to reset the tire pressure warning light on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To reset the tire pressure warning light on our Volkswagen Polo, start by turning on the car without starting the engine. Then, use the buttons on th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos