Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp on a Volkswagen Passat B7?

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Headlight

To replace the front headlamp on a Volkswagen Passat B7, open the bonnet to access the engine bay and loosen all the bolts securing the grille at the front, located just above the front bumper. Once the grille is removed, disconnect the connectors attached to the back of the headlamps and loosen the bolts securing them in their housings. When the bolts are loosened and the connectors disconnected, you can extract the headlamps and replace them with new parts.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Volkswagen Passat?
How to Replace the Front Headlamp Bulb on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the front headlamp bulb on a Volkswagen Passat, open the bonnet to access the engine bay. Once the bonnet is open, remove the circular cov…
Replacing the Front Indicator Bulb on the Volkswagen Passat
Replacing the Front Indicator Bulb on the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Today, we will briefly discover the instructions that will allow us to remove and replace the front indicator bulb on the Volkswagen Passat. First, m…
How to Replace the Front Headlight Bulb of the Volkswagen Passat?
How to Replace the Front Headlight Bulb of the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) To replace the front headlight bulb of the Volkswagen Passat, lift the bonnet to access the rear of the headlight corresponding to the bulb to be rep…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos