Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the EPC Light on a Volkswagen Polo 1.2

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

This guide provides the main instructions to reset the EPC light that appears on the instrument cluster of the Volkswagen Polo 1.2. First, get into the vehicle and connect your diagnostic tool to the OBD port of your car; then perform an error scan and address the issues in the ECU (remember that the EPC is the control unit for all electrical components).

Now check that the EPC light turns off when the vehicle is started, restoring its normal function, by following the video until the end!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to remove the EPC warning on the Volkswagen Polo 1.2
How to remove the EPC warning on the Volkswagen Polo 1.2
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The instructions provided in this guide will allow us to eliminate the EPC warning light on the dashboard of the Volkswagen Polo 1.2. Usually, the EP…
How to reset the EPC light on the Volkswagen Polo?
How to reset the EPC light on the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The EPC light indicates a warning from the Electronic Power Control system, which manages the ignition and fuel supply to the engine. Generally, this…
How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Start by sitting in the driver's seat of your Volkswagen Polo. Next, press and hold the "0.0/SET" button located below the multifunction display of t…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - The EPC light of the Volkswagen Polo 1.0 TSI Sport BMT is on, what can I do? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos