Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
MK 4, Polo 4, Polo IV, MK IV, 9N
- Years 2001-2009 The EPC light signals a warning from the Electronic Power Control system, which manages the ignition and power supply of the engine. Generally this warning light comes on on the Volkswagen Polo instrument panel when there are problems related to the throttle body sensor: therefore, by opening the hood and accessing the right side of the engine block, it will be possible to disconnect the old sensor, clean it and connect it again. Only in some cases will it be necessary to completely replace the sensor; once this has been cleaned or replaced, it will be possible to see that the EPC light will be off.
Posted on 11 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |