Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to disassemble the door lock on Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Lock
Operation: How to disassemble the door lock on Volkswagen Polo

If we need to replace the lock on this car model, we will find the information and steps necessary to carry out the operation in the description below. First you need to open the door and locate the screw located on the side of the lock and proceed to unscrew it. Subsequently, lever a screwdriver from the outside of the door to remove the plastic frame around the lock. Then proceed, always with the same screwdriver, to lever to extract the lock itself from the external side. Once the lock has been removed, we can take the new one and then proceed with its replacement.


Posted on 21 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Why doesn't the trunk of the Polo 6r open? Read Answer
    • Polo 2017-2025 - How to unlock the rear door on Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How to disable automatic locking in the Volkswagen Polo? Read Answer
    • Polo 2017-2025 - How to open the door of the Volkswagen Polo with the mechanical key? Read Answer
    • Polo 2001-2009 - How do I remove the locked rear door lock on the Volkswagen Polo 9n? Read Answer
    • Polo 2009-2017 - Why doesn't the left rear door of a Volkswagen Polo open? Read Answer
    • Polo 2009-2017 - Why did the lock on my Volkswagen Polo get stuck? Read Answer
    • Polo 2001-2009 - How to open a door locked by the electronic lock on Volkswagen Polo? Read Answer
    • Polo 2009-2017 - Where is the lock located in the Volkswagen Polo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos