Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cooling System Bleeding

Model: Volkswagen Bora MK 7 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Antifreeze coolant

See other generations:
Video tutorial

It is advisable to perform this maintenance with the engine cold as you will be handling coolant. To bleed the system, there is a specific valve located under the radiator on the driver's side, through which you can drain the coolant.

For easier access to the bleed valve, remove the left front wheel and the splash guard located just under the engine. Place a container under the valve outlet and open the tap to let the coolant drain out.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Cooling Circuit Repair and Antifreeze Replacement
Cooling Circuit Repair and Antifreeze Replacement
Volkswagen Bora (1998-2005 / MK 6) Lift the vehicle and secure it. Before proceeding, open the radiator cap. Remove the plastic cap located under the radiator using the appropriate too…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos