Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
Polo V, MK V, 6R, Polo 5, MK 5
- Years 2009-2017 In order to change the engine oil of the Volkswagen Polo 1.2 TSI you have to go and lift the car so that you can unscrew the bolts that fix the panel of its lower part, giving access to the components below. Here there will be the oil drain plug, which must be opened by unscrewing the appropriate bolt and collecting the used oil in a suitably positioned container. While the oil is running out, it will also be possible to remove the old oil filter placed next to it and replace it with a new one. After all the oil has flowed out, it will be necessary to close the drain plug and top up by accessing the special tank inside the engine compartment.
Posted on 12 September 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |