Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Engine air filter replacement

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Air filter
Operation: Engine air filter replacement

The engine air filter container (air box) is located right next to the front shock absorber dome: unscrew the fixing screws of the cover (just loosen them without removing them), lift it and extract the old filter; remove any residual dirt from the inside of the filter box using a vacuum cleaner rather than compressed air and insert the new filter making the gasket adhere to the edges of the box itself; finally apply the cover by tightening the relative fixing screws. The new air filter will allow the engine to take in the right amount of air, improving performance and fuel consumption.


Posted on 11 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the Volkswagen Polo air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos