Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Discs and Pads

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Brake rotors

See other generations:
Video tutorial

Once you have lifted the vehicle, remove the rear wheel and the brake caliper; extract the old pads and also remove the caliper bracket; then unscrew the disc retaining bolt and take it off the hub; clean the disc seat on the hub with a wire brush and apply grease; clean the disc of any protective oil residues and install it on the hub, tightening the corresponding retaining bolt; retract the caliper piston using the appropriate tool; clean the brake support, apply the new sliding shims for the pads, lubricate the caliper retaining bolts, and complete the installation.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacement of Rear Discs and Pads
Replacement of Rear Discs and Pads
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Lift the vehicle on a hydraulic lift and remove the rear wheel. Then, remove the caliper by unscrewing the fixing pins from the support. Extract the …
Replacement of Rear Brake Discs and Brake Pads
Replacement of Rear Brake Discs and Brake Pads
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Lift the vehicle on a lift and remove the wheel where the repair will take place. Unscrew the fastening bolts of the brake caliper located at the rea…
Replacing the Rear Brake Pads on a Volkswagen Golf VII
Replacing the Rear Brake Pads on a Volkswagen Golf VII
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To replace the rear brake pads on a Volkswagen Golf, first open the brake fluid reservoir, lift the car, and remove the wheel. Clean the surfaces nea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos