Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of a Volkswagen Passat B5

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

See other generations:
Video tutorial

This guide describes the best method to remove the door panel of your Volkswagen Passat B5 safely and independently. Ensure the car is completely off and parked securely.

Open the door in question and remove the screw located at the bottom of the handle using a suitable screwdriver. Then, remove the handle itself.

Next, unscrew all the screws located around the perimeter of the panel. Once done, pull the panel towards you to completely remove it.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) Before you can start, open the door of your Volkswagen Passat. Begin by unclipping and removing the insert of the door handle panel, using a thin but…
Volkswagen Passat (2010-2014 / B7) To remove the door panel of the Volkswagen Passat, use a tool to pry off the trim of the armrest: this will give you access to the screws underneath,…
Volkswagen Passat (2005-2010 / B6, 3C) Good morning, today’s objective is to dismantle the front door panel of our Volkswagen Passat. Start by opening the front door of the vehicle. Next, …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos