Do it yourself
Frequently asked questions about cars and motorcycles

How to Disinfect the Air Conditioning System of a Volkswagen Golf VII

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air conditioner

See other generations:
Video tutorial

To disinfect the air conditioning system of the Volkswagen Golf VII, first remove the cabin air filter located behind the glove compartment. Then, dismantle the glove compartment and take out the filter.

Take this opportunity to replace it. You can find it on Amazon for £10.50 plus £3.50 shipping. However, clean the compartment to remove any dust and dirt before fitting the new filter.

Remember that the arrows on the filter should always point downwards. Reassemble everything.

Now, remove the panel located on the passenger side. You will need to purchase a can of air conditioning sanitising spray.

It is important that it is alcohol-based and does not foam, as wet foam could come into contact with electrical wires and connectors, causing damage. You can find it on major e-commerce platforms starting from £7.50. Connect to the air conditioning duct and spray.

Then spray inside the air outlet grilles, inserting the tube deeply. With all windows closed and the grilles fully open, turn on the air conditioning to maximum for about ten minutes to dry the ducts.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) On the vehicle in question, it is possible to reset the climate control system related to airflow deviators. To do this, proceed as follows: turn on …
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The system in question can be seen in this video, in which we mainly address, referring to the Volkswagen Golf 7, the issue of hot air output. In gen…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This video shows how to play music from your smartphone via Bluetooth on a Volkswagen Golf VII. First, ensure that your phone is correctly paired wit…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos