Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Id 3
    4. : How to know the fuse diagrams of a Volkswagen ID 3

Volkswagen Id 3 - Video tutorial

Model: Volkswagen Id 3 MK 1 - Years 2019-2024
Operation: How to know the fuse diagrams of a Volkswagen ID 3

The first fuse panel of a Volkswagen ID 3 car is located inside the passenger compartment of the vehicle, exactly behind the dashboard located at the bottom left of the steering wheel, therefore on the driver's side. This first panel has fuses assigned to: airbag control unit, front camera assist driving system, interior lights, heater and air conditioning, heated seats, panoramic roof, door lock, park assist, electric steering lock, starting system, USB connector, horn, alarm, rain sensor, light sensor, 12V accessory socket etc. The next fuse panel is located inside the engine compartment and contains fuses assigned to: ABS, high beam, low beam, horn, radiator, fuel pump, etc.


Posted on 14 December 2022 by ScegliAuto



Where is the fuse box located in the Volkswagen ID 3?
Volkswagen Id 3 (2019-2024 / MK 1) The fuse box of your Volkswagen ID 3 is located inside the cabin and to locate it, you just need to follow the various steps described in our new gui
Where are the fuses located in the Volkswagen ID.3?
Volkswagen Id 3 (2019-2024 / MK 1) Inside the Volkswagen ID.3, all the fuses are located inside fuse boxes that are installed in the vehicle: in this type of vehicle, two boxes can be
Where are the fuses located in the Volkswagen ID 3?
Volkswagen Id 3 (2019-2024 / MK 1) In this video, we can see where the fuse boxes are located in the Volkswagen ID 3 and the positions of their respective boxes, to consult in case we

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos