Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Caddy
    4. : When to replace the timing belt of the Volkswagen Caddy1 6 tdi

Volkswagen Caddy - Video tutorial

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Air conditioning controls
Operation: When to replace the timing belt of the Volkswagen Caddy1 6 tdi

The timing belt is a fundamental component for the optimal functioning of the engine because it connects the crankshaft which moves the pistons and the connecting rods with the camshaft which in turn moves the valves. If the timing belt were to give way, synchronism or the "phase" between the shafts, pistons and valves would be lost, which would cause irreparable damage to the engine. As far as the timing for replacing the belt is concerned, always refer to the use and maintenance manual of the vehicle preceding the replacement between 120,000 km and 180,000 km.


Posted on 14 December 2022 by ScegliAuto



How to change the timing belt of the Volkswagen Caddy 2.0 TDI
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this guide we will see the main steps to be able to remove and replace the timing belt of the Volkswagen Caddy 2.0 TDI, from 2017. First we open t
Guide to replacing the timing belt of the Volkswagen Caddy 2.0 TDI.
Volkswagen Caddy (2003-2020 / MK 3, 2K) Below we will see the main steps that will allow us to disassemble and replace the timing belt of the Volkswagen Caddy 2.0 TDI. First of all, we open
How to replace the timing belt on Volkswagen Caddy 1.6 TDI?
Volkswagen Caddy (2003-2020 / MK 3, 2K) To be able to replace the timing belt of the Volkswagen Caddy 1.6 TDI it is necessary to first remove some obstructions inside the engine compartment

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos