Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Belt on the Volkswagen Golf 1.6 TDI

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

This guide provides instructions on how and when to replace the timing belt on the Volkswagen Golf 1.6 TDI. For this type of engine, the manufacturer states that the belt should generally be replaced every 130,000 miles or 6 years. Therefore, open the bonnet and start by removing the upper plastic cover.

Also, remove the fuel filter and then take off the engine mount, as illustrated in the video. At this point, remove the V-belt and the timing cover, following the video tutorial until the end for the replacement of the timing belt!


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
How to Replace the Timing Belt on a Volkswagen Golf 6 1.6 TDi?
How to Replace the Timing Belt on a Volkswagen Golf 6 1.6 TDi?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the timing belt on a Volkswagen Golf 6 1.6 TDi, open the bonnet to access the left side of the engine block. You will need to remove some …
Replacement of the timing belt of the Volkswagen Golf 1.9 TDI
Replacement of the timing belt of the Volkswagen Golf 1.9 TDI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The following steps will show us how to disassemble and replace the timing belt of the Volkswagen Golf 1.9 TDI. First, we open the hood of the car an…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos