Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Timing Belt on a Volkswagen 1.6 TDI

Model: Volkswagen Volkswagen Various
Part: Timing belt

Replacing the timing belt on a car is a rather complex task; here are general guidelines for the replacement, also aided by the video. First, lift the vehicle and remove the soundproofing panels under the engine, remove the right wheel and the inner wheel arch lining, take off the upper engine cover, and disconnect the fuel inlet and return lines. Also, remove the fuel filter and its bracket, take out the coolant reservoir, and begin removing the upper timing cover. Next, remove the bolt from the crankshaft pulley and then the lower cover. Rotate the crankshaft clockwise to the top dead centre and lock the camshaft and crankshaft with a pin to prevent losing the engine timing when removing the belt. Finally, to extract the belt, loosen the tensioner.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the water pump on a Volkswagen car
How to change the water pump on a Volkswagen car
Volkswagen Volkswagen Various In this video, we can see how to change the water pump on a Volkswagen car with a 1.9 TDI engine, installed on Passat, Golf, Corrado; Audi, Seat Cord…
Replacing the Water Pump on Volkswagen 1.6
Replacing the Water Pump on Volkswagen 1.6
Volkswagen Volkswagen Various In this video tutorial, we will see the main steps to dismantle the timing kit with the water pump on Volkswagen 1.6 petrol engines. Open the bonnet …
How do you replace the water pump of the Volkswagen 1.4 TSi engine?
How do you replace the water pump of the Volkswagen 1.4 TSi engine?
Volkswagen Volkswagen Various In order to replace the water pump of the Volkswagen 1.4 TSi engine, you need to access the side of the engine where the timing belt is located: it w…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos