Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump on the Volkswagen Touran

Model: Volkswagen Touran MK 1, 1T - Years 2003-2015
Part: Fuel pump

If you need to replace the fuel pump on this model of vehicle, you can find instructions on how to proceed in this description and refer to the images in the video. The first step is to remove the rear seats by flipping them first. Underneath, you will find metal cross members that you will need to remove, followed by the plastic panel. In the centre of the floor, you will find the cover under which the pump is located. Proceed to unscrew the support ring and disconnect the electrical connector and the two fuel lines. At this point, you can extract the pump from its housing.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Pump on a Volkswagen Touran?
How to Replace the Diesel Pump on a Volkswagen Touran?
Volkswagen Touran (2003-2015 / MK 1, 1T) To remove the diesel pump from the Volkswagen Touran, loosen the screws securing the rear seat at the front and rear of the seat itself. Once these s…
How to Replace the Fuel Pump on a Volkswagen Touran?
How to Replace the Fuel Pump on a Volkswagen Touran?
Volkswagen Touran (2015-2024 / 5T, MK 2) To replace the fuel pump on a Volkswagen Touran, lift the rear seats by pulling the lever located on the side of the seat and then grasping the handl…
How to remove the diesel pump on a Volkswagen Touran
How to remove the diesel pump on a Volkswagen Touran
Volkswagen Touran (2003-2015 / MK 1, 1T) Make sure the vehicle is turned off and the key is removed from the ignition. Disconnect the negative terminal of the battery to avoid short circuits…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos