Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Volkswagen Tiguan

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

See other generations:
Video tutorial

If you have replaced the engine oil and filter on this model from the German manufacturer, you must then reset the service indicator that has illuminated on the instrument panel. To do this, follow the instructions below and refer to the video.

First, with the ignition off, press and hold the reset button located on the right side of the dashboard under the speedometer. Then, turn on the ignition and after a few seconds, release the button.

Next, press the button located far left on the instrument panel, and the service indicator will be reset.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a Volkswagen Tiguan?
How to Reset the Oil Service Light on a Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this tutorial, we will see how to reset the oil service light on a Volkswagen Tiguan, a very simple and quick operation to be performed only after…
Reset the service reminder and inspection on a Volkswagen Tiguan.
Reset the service reminder and inspection on a Volkswagen Tiguan.
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this tutorial video, see how to reset the service reminder and inspection on a 2014 Volkswagen Tiguan. First, perform maintenance on the vehicle, …
How to reset the service light on a 2017 Volkswagen Tiguan.
How to reset the service light on a 2017 Volkswagen Tiguan.
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) To reset the service, that is, to clear the maintenance reminder on the 2017 Volkswagen Tiguan, turn the ignition to the active position while leavin…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos