Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Start&Stop of the Volkswagen Golf 8?

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Checks and maintenance

To disable the Start&Stop feature of the Volkswagen Golf 8, turn on the instrument cluster by rotating the ignition key in the ignition switch. This will allow you to navigate the menu that appears on the central display. Specifically, select the icon with the car drawing and then the one with the circled 'i': this will bring up the screen from which you can activate or deactivate the Start&Stop. When activated, the corresponding box will be blue, while when deactivated, it will be white.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the Start&Stop system on the Volkswagen Golf, you need to use a diagnostic tool, in this case, OBD 11, which can be controlled directly fr…
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) The instructions in this guide will show you how to disable and enable the Start&Stop system on the Volkswagen Golf. First, get into the vehicle and …
Volkswagen Golf (2019-2026 / Golf 8, MK 8, Golf Viii) To disable the Start&Stop on the Volkswagen Golf 8, turn on the instrument cluster by inserting the key into the ignition switch. This will allow you…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos